Fringe Sport
Fringe Sport Dane 2.0 Half Rack Functional Trainer
92 in234 cm tall half rack with a 1,200 lb544 kg rack capacity and dual 160 lb72.6 kg 1:1 stacks.
Spec-based page. We did not test this product. Source: manufacturer page.
Who it's for
Lifters who want a 3x3 half rack and functional trainer in one 60 in152 cm x 47 in119 cm x 92 in234 cm frame.
Who should skip
Ceilings under the 95 in241 cm assembly clearance Fringe lists for a standard install.
| HeightAssembled height versus your ceiling. | 92 in234 cm |
|---|---|
| Width | 47 in119 cm |
| Depth | 60 in152 cm |
| Listed capacity | 1,200 lb544 kg |
|---|---|
| Unit weight | Not published |
| Uprights3×3 in, 11-gauge is a common attachment standard. | 3x3 |
|---|---|
| Gauge | 11 |
| Hole spacing | Not published |
| Hole size | 1 in2.5 cm |
| Warranty | Lifetime warranty on the squat rack and 5 year warranty on the pulley system |
| Inside depth | Not published |
|---|---|
| Inside width | Not published |
| Pull-up bar height | Not published |
Source: manufacturer spec sheet, checked 2026-10-14. How we measure
Fringe lists 11-gauge 3x3 uprights with 1 in2.5 cm holes, a 1,200 lb544 kg rack capacity, dual 160 lb72.6 kg stacks at a 1:1 ratio, and 60 in152 cm x 47 in119 cm x 92 in234 cm dimensions.
The page says the unit is 92 in234 cm tall and mounting brackets need about 95 in241 cm to assemble the standard way; depth is about 60 in152 cm with extension feet and closer to 33 in83.8 cm without them.
Warranty is lifetime on the squat rack and 5 years on the pulley system.
Nearby specs
| Spec | Fringe Sport Dane 2.0 Half Rack Functional Trainer | Rogue RML-390F Flat Foot Monster Lite | Rogue RML-490 Power Rack 3.0 |
|---|---|---|---|
| Height | 92 in234 cm | 92.25 in234 cm | ✓ 90.38 in230 cm |
| Width | ✓ 47 in119 cm | 49 in124 cm | 49 in124 cm |
| Depth | 60 in152 cm | ✓ 48 in122 cm | 49 in124 cm |
| Listed capacity | ✓ 1,200 lb544 kg | Not published | Not published |
| Unit weight | Not published | 295 lb134 kg | ✓ 340 lb154 kg |
| Uprights | 3x3 | 3x3 | 3x3 |
| Gauge | 11 | 11 | 11 |
| Hole spacing | Not published | Westside hole spacing | 1 inch through bench and clean pull zone, 2 inch above and below |
| Hole size | ✓ 1 in2.5 cm | Not published | Not published |
| Warranty | Lifetime warranty on the squat rack and 5 year warranty on the pulley system | Not published | Lifetime Warranty |
| Inside depth | Not published | ✓ 30 in76.2 cm | 43 in109 cm |