We may earn commissions from Amazon and other retailers. It doesn't change our picks. Affiliate disclosure

RitFit

RitFit GATOR 1600LB Adjustable Weight Bench

The GATOR is a 1,600 lb726 kg, 109 lb49.5 kg adjustable bench with 10 back angles from 0 to 85 degrees, 3 rear decline settings to -7 degrees, and an 11.8-inch pad.

14.6×57.8 in37.1×147 cm

Spec-based page. We did not test this product. Source: manufacturer page.

Who it's for

Lifters who want a headrest-equipped FID bench with a published 1,600 lb726 kg total load and 57.8-by-25.2-inch footprint.

Who should skip

Competitive benchers who need a single 16.5–17.7-inch IPF height; RitFit lists height as 14.6 to 51.3 in130 cm depending on setting.

Dimensions
HeightAssembled height versus your ceiling.14.6 in37.1 cm
Width25.2 in64 cm
Depth57.8 in147 cm
Capacity
Listed capacity1,600 lb726 kg
Unit weight109 lb49.5 kg
Build
WarrantyNot published
Bench
Pad width11.8 in30 cm
Min back angle0
Max back angle85
DeclineYes

Source: manufacturer spec sheet, checked 2026-10-14. How we measure

RitFit lists 57.8-inch length, 25.2-inch width, 14.6–51.3-inch height, 109 lb49.5 kg weight, and 1,600 lb726 kg total load on 14-gauge 50-by-70 mm steel.

Back angles are 0, 15, 30, 37.5, 45, 52.5, 60, 67.5, 75, and 85 degrees, with rear decline settings of -2.5, -4.5, and -7 degrees.

Back pad width is 11.8 in30 cm, pad thickness is 2.7 in6.9 cm, and the seat-back gap is 2 in5.1 cm.

Nearby specs

Spec14.6×57.8 in37.1×147 cmRitFit GATOR 1600LB Adjustable Weight Bench17.5×56.5 in44.5×144 cmRogue Adjustable Bench 3.018×47 in45.7×119 cmRogue Flat Utility Bench 2.0
Height✓ 14.6 in37.1 cm17.5 in44.5 cm18 in45.7 cm
Width25.2 in64 cm24.75 in62.9 cm✓ 14 in35.6 cm
Depth57.8 in147 cm56.5 in144 cm✓ 47 in119 cm
Listed capacity✓ 1,600 lb726 kgNot publishedNot published
Unit weight109 lb49.5 kg✓ 125 lb56.7 kg49 lb22.2 kg
WarrantyNot publishedLimited Lifetime (frames)Limited Lifetime (frames)
Pad width11.8 in30 cm✓ 11 in27.9 cm12 in30.5 cm
Min back angle✓ 0✓ 0✓ 0
Max back angle✓ 85✓ 850
DeclineYesNoNo