REP
REP BlackWing
The BlackWing is REP’s 1,000 lb454 kg ZeroGap FID bench with 12 back angles from -8 to 85 degrees, a 17.2-inch height, and a listed 131 lb59.4 kg weight.
Spec-based page. We did not test this product. Source: manufacturer page.
Who it's for
Lifters who want ZeroGap, built-in -8-degree decline, 72 published angle combinations, and 3.1 sq ft vertical storage.
Who should skip
Buyers who want a lighter bench; REP lists the BlackWing at 131 lb59.4 kg, heavier than the AB-3000 2.0 and AB-5200 2.0.
| HeightAssembled height versus your ceiling. | 17.2 in43.7 cm |
|---|---|
| Width | 25.8 in65.5 cm |
| Depth | 59.5 in151 cm |
| Listed capacity | 1,000 lb454 kg |
|---|---|
| Unit weight | 131 lb59.4 kg |
| Warranty | 10 |
|---|
| Pad width | 12.2 in31 cm |
|---|---|
| Min back angle | -8 |
| Max back angle | 85 |
| Decline | Yes |
Source: manufacturer spec sheet, checked 2026-10-14, checked 2026-10-14, checked 2026-10-14. How we measure
REP states 12 back pad angles (-8, 0, 10, 20, 30, 37.5, 45, 52.5, 60, 67.5, 75, 85) and 6 seat angles on an 11-gauge frame rated 1,000 lb454 kg.
Official dimensions are 131 lb59.4 kg, 59.5-inch length, 25.8-inch width, 17.2-inch height, and a 12.2-inch standard pad (14 in35.6 cm wide).
The product page describes it as a flat-incline-decline bench with ZeroGap and 3.1 sq ft upright storage.
Nearby specs
| Spec | REP BlackWing | Rogue Adjustable Bench 3.0 | Rogue Flat Utility Bench 2.0 |
|---|---|---|---|
| Height | ✓ 17.2 in43.7 cm | 17.5 in44.5 cm | 18 in45.7 cm |
| Width | 25.8 in65.5 cm | 24.75 in62.9 cm | ✓ 14 in35.6 cm |
| Depth | 59.5 in151 cm | 56.5 in144 cm | ✓ 47 in119 cm |
| Listed capacity | ✓ 1,000 lb454 kg | Not published | Not published |
| Unit weight | ✓ 131 lb59.4 kg | 125 lb56.7 kg | 49 lb22.2 kg |
| Warranty | ✓ 10 | Limited Lifetime (frames) | Limited Lifetime (frames) |
| Pad width | 12.2 in31 cm | ✓ 11 in27.9 cm | 12 in30.5 cm |
| Min back angle | -8 | ✓ 0 | ✓ 0 |
| Max back angle | ✓ 85 | ✓ 85 | 0 |
| Decline | Yes | No | No |