REP PR-1100 Power Rack vs REP PR-4000 Power Rack

REP PR-1100 Power Rack versus REP PR-4000 Power Rack is a spec comparison, not a test. REP’s 2×2 / 2×3 class versus 3×3. Every number below is copied from a manufacturer page or official sheet and carries an as-of date of 2026-10-14 on the product records. If a field is blank on the maker’s page, it stays blank here.

REP describes the REP PR-1100 Power Rack as: 85 in tall, 700 lb rackable capacity, 2x2 in 14-gauge steel on a 58.1 in x 48.5 in footprint. REP publishes 85 in height, 58.1 in width, 48.5 in depth, 130 lb rack weight, and a 44 in W x 24 in D x 79 in H working area. Construction is 2x2 in 14-gauge steel with 3 in hole spacing, 1 in holes, and 3/8 in hardware. Rackable capacity is 700 lb. The official warranty page lists lifetime coverage on rack frames.

REP describes the REP PR-4000 Power Rack as: 1,000 lb rackable capacity on 3x3 in 11-gauge steel with 1 in bench-zone hole spacing. The PR-4000 pre-selected page lists 3x3 in 11-gauge steel, 1,000 lb rackable capacity, 5/8 in hole size, 1 in spacing in the bench zone and 2 in elsewhere, and 50.8 in width. Upright heights are 80 in and 93 in; crossmember depths are 16, 24, 30, and 41 in. Check the current manufacturer list price. REP’s warranty page covers rack frames for life.

On listed height, REP PR-1100 Power Rack is 85 in and REP PR-4000 Power Rack is 93 in. Width is 58.1 in versus 50.8 in. Depth / length is 48.5 in versus 30 in (falling back to a listed length where a maker omits depth). Unit weight is 130 lb versus not published lb. Listed load or user capacity is 700 lb versus 1000 lb.

Uprights are listed as 2x2 (14 gauge) versus 3x3 (11 gauge). Hole spacing is “3 inch” versus “1 inch within bench zone, 2 inch elsewhere”. Inside depth is 24 in versus 30 in. A 30 in interior changes which benches fit; a 43 in interior is a different machine. Pull-up bar height is not published in versus not published in. Warranty text is “Lifetime warranty on rack and functional trainer frames” versus “Lifetime warranty on rack and functional trainer frames”.

FitScout spec scores — our weighted rubric, not Amazon stars — are 45 for REP PR-1100 Power Rack and 73 for REP PR-4000 Power Rack. Missing fields do not count as zeros; they drop out of the average. The rubric for power racks is published on the methodology page.

We do not print manufacturer list prices or Amazon prices on this page. Use Check price on each card for the current offer.

Who the REP PR-1100 Power Rack is for, in our reading of the spec sheet: First home-gym buyers who want a compact 700 lb cage with a multi-grip pull-up bar and 1000-series attachments. Skip it when need to bolt the rack down, use band pegs, or do kipping/muscle-ups — REP says those are not recommended.

Who the REP PR-4000 Power Rack is for: Lifters who want 5/8 in pinholes and 1 in spacing through the bench zone on an 80 in or 93 in 3x3 cage. Skip it when needs 1 in pinholes or 2 in spacing on every hole — those are PR-5000 specs on this page.

If ceiling height is the constraint, prefer the shorter published frame and then run Will-It-Fit with your ceiling, your height, and the exercise. HAJEX’s standing-press rule of thumb is height × 1.33 plus about 9 in for full-size plates. A rack that “fits the room” on assembled height can still fail a pull-up if there is not about a foot above the bar.

This page does not say either product was used, assembled, or worn-in by FitScout. Sources are the manufacturer URLs on each spec row. If a maker updates a dimension after 2026-10-14, the as-of date is the tell.

660 words. Spec-based analysis, not a test report.